I picked up a Zeiss Contessa a year ago and started shooting film again. I did it because I was always taking pictures with my digital camera and just storing the images on the computer and not really looking at them again. I thought that if I was shooting film, I would have to get the pictures developed and would then have pictures to put on the wall or in albums.
I got my first rolls of film developed and have learned that it is rather expensive now to get prints made. I’ve since gotten the supplies to develop my own film and while talking about how excited I was to try it out, they asked if I wanted to use their old cameras.
I figured why not, it couldn’t hurt to play around with some other cameras. My dad had an SLR (Single-Lens Reflex) and a TLR (Twin-Lens Reflex). I wanted to get away from SLRs and so took my dad’s Supper Ricohflex. My mum had her dad’s Voigtländer Brilliant which looked in rougher shape, but I took it as well.
The lens on the Voigtländer needed a good clean and the picture counter wasn’t counting. I was able to get the lenses off the front and clean them with some cleaner and lens paper. Getting to the back lenses was a little trickier. I had to borrow a pair of surgical clamps so I could loosen the ring holding the lenses on. In a stroke of luck, it was also the ring holding the whole front mechanism to the body. I was able to give everything a once-over, it looked like the timing mechanism on the shutter was working fine.
The viewfinder lens was held in with a couple of screws and although the spring flaps don’t come off, I was able to clean the mirror and the inside of the lens.
For the picture counter, I was able to take out the false wall on the inside. It was pop-riveted on, regrettably, I thought it was friction fit on and ended up pulling the rivet through the camera body.
I wasn’t sure if I could save the counter at that point but managed to drill out the rivet and saw that an M3 screw would fit nicely in the old rivet hole and I could use a washer to go over the now larger rivet hole on the body.
The spring on the counter needed an extra wind in its coil and the numbers needed a little glue to reattach to the front of the gear. I’m just waiting on a screw of the right length and hopefully, it will be taking pictures as good as new.Follow Me Here: